BKWGS - SEALTIGHT 3405

  • MSDS: BKWGS
  • Manufacturer: W R MEADOWS INC
  • Product Name: SEALTIGHT 3405
  • National Stock Number: 8030-00F017706
Product Identification

Product ID:SEALTIGHT 3405
MSDS Date:10/01/1985
FSC:8030
NIIN:00F017706
MSDS Number: BKWGS

Responsible Party
W.R. MEADOWS INC
ELGIN, IL 60121

Emergency Phone: (312) 683-4500

Info Phone: (312) 683-4500

Cage: FO899

Contractor
W.R. MEADOWS INC
543 ELGIN, IL 60121 US

Telephone: (312) 683-4500

Cage: FO899

Ingredients

ASPHALT (PETROLEUM)

CAS: 8052-42-4

RTECS: CI9900000

ACGIH TLV: 5 MG/M3; (FUME);9192

Hazards

Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN: IRRITATION.

First Aid

First Aid:SKIN: WASH EXPOSED W/SOAP & WATER. EYES: FLUSH W/PLENTY OF
WATER. INHALATION: REMOVE TO FRESH AIR, & TREAT SYMPTOMATICALLY.
OBTAIN MEDICAL ATTENTION IN ALL CASES.

Fire Fighting

Flash Point Method:TOC
Flash Point:485F
Extinguishing Media:FOG, FOAM, DRY CHEMICAL, CO2
Fire Fighting Procedures:USE PETROLEUM FIREFIGHTING PROCEDURES.

Accidental Release

Spill Release Procedures:PREVENT PRODUCT FROM ENTERING SEWER OR
WATERWAYS. ALLOW TO COOL & COLLECT FOR DISPOSAL.

Handling

Handling and Storage Precautions:HEATED MATERIAL MAY CAUSE SEVERE
BURNS.
Other Precautions:ASPHALT FUMES MAY CONTAIN HYDROGEN SULFIDE GAS.

Exposure Controls

Respiratory Protection:NOT REQUIRED UNDER NORMAL CONDITIONS W/ADEQUATE
VENTILATION, IF OPERATING CONDITIONS CAUSE HIGH VAPOR
CONCENTRATIONS OR TLV IS EXCEEDED, USE AN APPROVED ORGANIC VAPOR
MASK.
Ventilation:LOCAL EXHAUST/MECHANICAL: AS REQUIRED
Protective Gloves:CHEMICAL RESISTANT
Eye Protection:CHEMICAL SPLASH GOGGLES
Other Protective Equipment:PROTECTIVE CLOTHING.
Supplemental Safety and Health

Chemical Properties

Spec Gravity:1.07
Solubility in Water:NIL
Appearance and Odor:BLACK SOLID, ASPHALT ODOR.
Percent Volatiles by Volume:0%

Stability

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:IGNITION SOURCES
Hazardous Decomposition Products:CO, CO2, & HYDROGEN SULFIDE GAS.

Disposal

Waste Disposal Methods:PERMITTED WASTE DISPOSAL FACILITIY. CONSULT
LOCAL ORDIANCE FOR COMPLIANCE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.